Check the configuration for "vlan1" and post it here. Is the name "vlan1" or "Vlan1"

Great correct answer for Rel 10.5 system Big HELP and Time saver!!!

I have a Cisco Unity Communications Manager rel 9.1.2 that supports a remote location with a Unity E...

Since the second port has a different MAC address should that DN also be DN 1 instead of SN 2?

There has to be some sort of limit to the bandwith to your locations. I would reccomend setting that...

Currently we're using ATA187's but I just need to find the time to configure one as a SIP endpoint a...

I have a call manager 8.5 currently using two 3945 as voice gateways connected to PSTN PRI circuits ...

Try configuring the second port on the ATA 187 to see if this resolves the issue, you don't need to ...

We had the same issue here on different phones and were directed to upgrade to 9-3-2-11.So far we ha...

We have had issues when the IP Phone field in not populated with the extension number in the LDAP re...

We have one coonected to a postage machine a Neopost IJ-90 with less than reliable connections and p...