We have a pair of Nexus 3064 switches running VPC. These have been in production for 3 years now running the same code version since the initial deploy. We recently (this year) started getting log messages for Keep alive failures. I enabled debug ...
We are testing a EoMPLS VC type 5 / Ethernet vc in our lab on VSS setup and not able to pass traffic. The VSS is Sup2T (15 + code) and we have a single AC connected to switch 2 of the VSS.. with switch 1 currently having the active sup in the system...
I have two questions:
1) 6500 (regardless of SUP) do not support standard 802.1ad correct? The "QinQ" functions available are non standard?
2) Can someone help me understand why tagging the native vlan is listed as a required step when configurin...
Hello, I have been doing alot of labbing and playing around with MPLS/LDP today with the following topology. A (PE) <--> B (P) <---> C (P) <--> D (PE)I have have three seperate IGP AS/domains defined sharing the loopbacks between the below rou...
Hey gang in lab I am trying to get SLAAC for ipv6 working for a single client and not having success. I can statically setup ipv6 global addresses on my test client and hit my gateway no problem. When I plug in wired I can pull SLAAC addresses all ...
thank you for the insight... I am unsure if we are running into the bug ..and why would it spring up \after 2 years? Next action on our end is to reconfigure interfaces to a standard routed port and see if that jobs something loose.
We cannot change upstream links do to the production state of the chassis. If a routing loop existed it should also break the successful test when the ac is on switch 1 ? vss is a single control plane.... unless I am missing something.
Thank you for the response. So when I read about MPLS core (P) routers architectures simply switching packets based on label. That general description of packet movement can only be achieved in the core (assuming I am only using MPLS IP w/ LDP) by...
Thank you for the response and information.. I am unable to make the jump 8.0 + yet and need to get some type of ipv6 working with 7.4 if possible. From this link it says SLAAC should be supported. I am still perplexed on why no love :( http://w...