Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
HiI have two DECT phones and three iphones connected to a 3CX server. When I try to transfer the call from the iphone to the cisco all is ok, but from the cisco to any other phone, it fails.I selected on the page just one line per phone.Am I missing ...
I couldn't find a more decent title, I just can't explain it better.This is the situation:Cisco 2800 with WIC card,ATM (ADSL) --> Dialer interface --> NAT with overload and Port Mapping --> Local ethernetThe issue:I mapped port 80, DNS is fine, but I...
HiI'm installing my second cisco router in my home network, I will use it for remote access.The problem comes with port mapping, I've been HOURS testing with no success, everything works, but the router doesn't forward the data. Only the 5900 port wo...
When I read the status messages I find those ones:*May 22 12:14:37.595: DHCPD: child pool: 192.168.0.0 / 255.255.255.0 (LAN)*May 22 12:14:37.595: DHCPD: pool LAN has no parent.What does it mean? It's not writtent in the DHCP manual... is it a proble...
Hi all.I'm new to the cisco IOS system. I'm also italian, so I can make mistakes while typing.I have the following problem: I need to connect my router to the internet using a PPPoE Tunnel (it will act as a gateway). The router is connected to my ISP...
Worked perfectly! I'm sorry, I'm still learning all this stuff, so sometimes I make confusion.Now I can reach the web server! I think this will work with all the other stuff too! THANK YOU!
I don't need it. I only need that the 128 server gives web access to port 80 to the 10.0.0.0 interface. And it does. I don't think it's a server problem.It's the router that does not forward packets to port 80 internal-external.
The other router is isolated, it's in another network, in the same switch.Router-2600 == 10.0.0.0Router-2800 == 192.168.0.0Both make a pppoe connection.There are no mappings to other IPs.Default gateway? No, it doesn't. It's a windows server, I prefe...
there are LOTS and lots of translations like these:tcp 87.6.44.87:80 10.0.0.32:80 87.10.45.154:57529 87.10.45.154:57529tcp 87.6.44.87:80 10.0.0.32:80 87.10.45.154:57530 87.10.45.154:57530tcp 87.6.44.87:80 10.0.0.32:80 ...
I need dynamic NAT everywhere... Isn't there a solution like most home routers? dynamic NAT with static port mapping? I remember I did make it work one time: one TCP and one UDP port, working together perfectly. Now looks like it's impossible..? The ...
