Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone, I have an issue where the configured programmable buttons have a line going through the image and gray over the color as well. If I unconfigure the buttons the image is normal. Any suggestions on where to change this so my line buttons ...
Hello everyone, I have a UC560 with 3 Auto Attendants and BACD. We are having intermittent issues where calls are in queue and are not being delivered. Some users in the hunt group receive the calls, but others intermittently will not. They will see...
I just finished configuring remote SSL VPN phones using a 7945G. I have an ASA 5510 as the firewall and 2800 Series router running Call Manager Express 8.6. I followed the following guide at the below link almost line for line (obv...
I have a brand new installed Server 2008 R2 VM running Cisco SCC Server 2.1. The ccdatabase and ccautomation service are continuously stopping. I have changed all services to manual, restarted server and services multiple times, reran a repair inst...
Just so everyone is aware, I ended up moving this back to SCCP. Even though documentation states that it is supported on SIP, the TAC engineer stated the documentation was wrong and it is not. While I don't accept this answer, I also didn't have the ...
Hi Kevin, any word from TAC on this as of yet? I was troubleshooting the same thing but came across your post and am putting my troubleshooting on hold until I hear if you have had any success.thanks!Steve
Hi Carlo, same results. Still getting a splash screen on the sidecar. Also my firmware is at the latest, 9-4. The firmware for the 7916 appears to be the same, same file with no distinction of SIP or SCCP.
Thanks Carlo, I did try that earlier but no success as of yet. The side car is still at the Cisco Splash screen (earlier when the phone was in SCCP it did go past the splash screen) Here’s the config for the voice register pool. Thanks for any help i...
Actually it is anywhere there is text configured on the screen. The company name configured on the bottom of the display causes a gray line across the screen as well.
