Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Morning All,
We use AnyConnect within our environment. We have been hosting it off an IOS device for about 6 years now.
We need to step up the featureset of our VPN, which includes moving it off IOS and onto the ASA (IOS has limited functionality...
A question I'm having some difficulty answering at the moment.
Are multi gigabit ports on a Cisco switch (say the 3650 or 3850) compatible with IEEE standard 10Gbase-T connections?
For example, I have a Dell FX2 chassis with a 10Gbase-T copper IO c...
Good morning,I'm observing what appears to be a bug in the smartport feature on our SG300 switches. We use this for our Auto Voice VLAN. We are using our own user defined macro's in place of the ip_phone and ip_phone_desktop as we use native vlans di...
The virtual wireless lan controller is purely awesome. It let's me control the hardware of the box and let's further converge my HA policies. However, I'm confused regarding support. I want smartnet - but the licenses for the controller are sold in a...
I am seeing a problem with our Cisco 300 switches. We use these switches as access switches, with a stacked 3750-G at the core, two 2960-S at the distribution layer, and about 10 300 Series switches at the access layer (10 port and 28 ports, all PoE)...
Thanks jialbert - I originally saw this error in my environment, where this line of code was removed and was running the original ip_phone macro against the port which totally screwed my environment up.This is why I upgraded to 1.4 to see if it had b...
Thank you for that. Would there be any reason at all why the macro auto user smartport macro ip_phone user_ip_phone $uservoice_vlan 30 would get removed from a config following a reboot? Would there be any reason as to why it would be removed during ...
Hi jialbert, Thanks for this. Yes I agree that adding the switchport trunk native vlan setting to the user macro will provide a workaround for the issue - however, we use different native vlan settings per interface.Gig1 may be on native vlan 10, gig...
Hi Aleksandra,I have tried but in order for me to do that I need a switch that is less than 12 months old. The only SG300 switch I have that is less than 3 years old cannot be remotely troubleshooted as it is in fairly heavy production.I have around ...