Hello everybody,Can I enable a Web Authentication to an external Captive Portal for a specific SSID with autonomous AP without WLC?I should activate an hot spot service, in order to manage guest/visitor users.I need to integrate autonomous AP to an e...
Hello,I'm evaluating a migration from ACS 5.3 to ISE 1.0, but in the official documentation I didn't find any reference to User Change Password (UCP) web service.Does ISE support UCP?If not, is it in road-map?many thanks,Andrea
I need to connect multiple site with point-to-point connections over 2 or 4 wires with shdsl tecnology.My goal is the transport of L2 frames and (2 or more Vlans) through this shdsl/atm connection.Could you tell me if I can use L2TPv3 or alternative ...
I have installed a new Stack of Catalyst Switch 3750X (2x WS-C3750X-24T-S).Network Lan works good by I think to have a cosmetic error:FAN 1 is OKFAN 2 is OKFAN PS-1 is OKFAN PS-2 is NOT PRESENTBoth fans of couple of Switch work good with green led.Ca...
Hallo everyone,I have a wireless network managed by a 4402 controller with this sw version : 5.2.178.0The client wants to add a stand alone wgb (cisco 1242 with an ios 12.4(21) ). The standalone ap associate to an LWAPP AP using the 5Ghz interface an...
Hi Gabijel, I evaluated a similar use case for experimental purpose in automotive context, but using IR829.I have drawn the following conclusions:You need a CAB Bus converter to RS-232 or LAN (the only available interfaces options on Cisco IR devices...
Hi
try this,
pr-fw01(config)# crypto isakmp identity ?configure mode commands/options: address Use the IP address of the interface for the identity auto Identity automatically determined by the connection type: IP address for pres...
Thanks for all replay.I have more remote site with local internet access and I need to centralize and share a captive portal/auth service locate in the HQ.I will evaluate the introdution of vitrual WLC and the AP conversion to flex deploy, in order t...