Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi Guys,i configured ldap, for authentication, on a Cisco 1921 with the c1900-universalk9-mz.SPA.151-4.M4.bin Image.I configured an LDAP connection, and it works fine. except after few minutes, if no one auth, the ldap connection is lost,and it goes ...
Unfortunately not...i opend an SR, the result of the BU was "it isn't an Cisco fault, maybe the CTI Application stores a wronge IP Adress in the cache and doesn't release them, also not after an update".An restart of the CTI Service on the CUCM coul...
Hi,do you have maybe an sample config for Entereasys and ACS 5.X, or an short guide?We try at the moment the same.MAC Authentication against Cisco ACS with Enterasys.But nothing works.Even if the ACS denied the access, the Enterasys didn't disable th...
Hi,are youe add the ASA inside IP as an route to Fritzbox, so the Fritzbox knows with which way they can reach the ASA?If you are able to configure the Fritz.box, you could try to use the fritz.box as an Modem, and use the PPPOE from ASA,so the ASA g...
Hi Amit,looooooooong time ago your post.Can only acknowled your issue, with CUCM 8.6.2a(SU2)We are using EM & CIPC 8.6.3.0, and sometime (but really really rare) the user get the message "out of service 58". If the same EM use a other device it work...
