I am facing issues with CUCM/CUC PIN synchronization. CUCM version is 18.104.22.16800-21 and CUC is 22.214.171.12400-21.
Gone through the configuration like this too posts.
Kindly note that we are facing issues in inter site calls , from SfB to CME. Please note that all other calls , like internal,PSTN calls working well from SfB.Issue persits only for intersite calls,which is with the below call flow.
We have WLC 2504 , having ZA as country configured , and having all of the APs are with model AIR-LAP1142N-E-K9. All the six AP s are working fine.
But we need to add one more AP, which is AIR-LAP1142N-N-K9 . Could you please let me kn...
Hello All;In our one of the remote site ,which we did call manager upgradation from 8.3 to 8.5.After upgration we noticed the following problems.We are using extension mobility service in the entire sites.1.Auto registration is not occuring by defau...
Stephen, Just a comment , you can easily achieve this by using trusted listed feature in the cube. Instead of no ip address trusted authenticate command in voice register global,define your internal network and also provider network and try this.
Have you try changing the FxO module to see configuration looks fine. Most of the disconnection issues are explained on this .