Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a cisco 6513 configured to use wccp v2 with a RedHat AS5 server running Squid 2.6 using L2 redirection. On the squid server I have defined the wccpv2 router and set the assignment to "mask". ON the 6513 I have applied the following commands......
I'm running an ASA 7.2.1 and a PIX 6.3.5. I've posted my config for the ASA, as it's what's causing me grief. I can extablish the tunnel for an IPSEC VPN on both ends (i just used the vpn wizard on both devices). My devices on the pix end (192.168...
We are connecting using an LC connector fiber cable from a redundant Sup 6500 to a redundant Sup 4507. We cannot get the link to become active. We can connect from either Sup on the 6500 to the same modules installed in a 3700 switch - but cannot n...
This looks like a smart license issue, the CSLU address is not configured in your output. If your CSSM registration has lapsed it will shutdown your SIP service. View RUM reports... (there are probably dozens of unacknowledged reports)(config)# serv...
Thanks for the info Antonin, we were not aware of the port usages. We moved the GBIC's over to 1/3 and 2/3 and then tried 1/4 and 2/4 with no success with either of the 4 links. We have done zero config to the interfaces and wondering if we need to...
