Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I need to pass EIGRP and IGRP through a gre tunnel through a pix! The tunnel is up through the pix and with show ip route: i see the route for the tunnel. however, I dont see the other routes for the other remote networks! any thoughts on what I am...
I have a router a on either side of the pix that need to pass eigrp and igrp to each other. I understand the pix by default blocks multicast, documenatioin states setting up neighbor statements on the routers. Any notes, configs, or expereiences see...
The 2800 does support Layer 2 Any Transport over MPLS (AToM) pseudowires and l2tpv3: http://www.cisco.com/en/US/docs/ios/12_3t/12_3t2/feature/guide/gtl2tpv3.html
access-list acl_out permit icmp any anyaccess-list acl_out permit icmp any any echo-replyaccess-list acl_out permit icmp any any unreachableaccess-list acl_out permit icmp any any time-exceededdont need to apply the statement to the inside interface,...
ICMP Message Types to Allow Outbound at the Perimeter Router/Firewall Message TypesNumber Name 4 source quench 8 echo request (ping)12 parameter problemTable 5: ICMP Message Types to Allow Inbound at the Perimeter Router/Firewall Message TypesNumber...
