Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I see this kind of entries on the show running configuration on my both ASA Active/Standby: no logging message 718069no logging message 718069 standbyno logging message 717045no logging message 717045 standbyno logging message 716021no logging mes...
Hi,
We had to convert several DX80 Android to TP DX80 with CE9.2...
Now we have all these devices registered to our CUCM 11.5 with extension mobility activated, that users can log in the device with their own device profile.
The question is: on the d...
Hello,We have already a L3 port channel configured and running between two pair VSS of 6880X and 6500 with two interfaces and would like to add two more interfaces, I plan to do it like below:Configure both new interfaces as the interfaces already co...
Hi,
I have a question about adding a new switch on a existing 6800ia stack or adding a switch on a standalone 6800ia switch.
Currently we have a 6880X VSS in prod with several 6800ia switches connected to it by double attachment, and I would like to ...
Hi,We are running CUCM 9.1 and created a phone template with all desired details and I want to apply this template to about 50 8945 phone that was registred to our CUCM by auto registration.I found alot of doc explaining how to create template but di...
Hi,I found the solution.- Remove the GLC-T from the interface- Reset the interface to the default- Reconfigure the interface with the access vlan and force the speed to 100 MB- No shut and insert SFP GLC-T and connect your device- Ping the device fro...
Hi, we have the same issue with our N9K-C93180YC-FX, we tried with GLC-TE and even with GLC-T supposed to be 10/100/1000. Inserting to the Nexus, we saw terminal log saying :%ETHPORT-5-IF_HARDWARE: Interface Ethernet1/36, hardware type changed to 1G...
Hi,Thanks for this detailed explanations and clarifications regarding this topic, i was searching this kind of process in order to create a repository to run backup (ise-config and ise-operational).Now my repository was created successfully, but when...
