Hello Voice Master, Need some assistance please.I am upgrading CUCM 8.5 to 9.1 but it keeps failing,before starting on production cluster wanted to try on LAB and wanted to document step by step process and follow the same on produ...
Hi Experts, This is some thing weird problem...whose area code starts with 9 and when they try to call FXO pots line after first ring they get dial tone then ends with fast busy signal...When I tried with all possibilities I figured...
CUCM 8.0.2.40000-1Unity 7.1.3Gateway 2811 MGCP-FXOIts Very critical Experts...Help me out...Thank you.Incoming call xxx-xxx-xxxx ----->Autoattendent--->punch down the ext--->Phone rigns(caller Id as 'O')Look at traces....18:24:04.086 |StationD: (0...
We have an issue regarding the call display on the 7965/7942 phones. Here it goes....When we receive a call on either a 7965 with multiple lines configured, and the call is placed on hold, we see a call display with the incoming number flashing o...
Hello Experts...sorry to creat new Discussion on Music on Hold.....coz i coudnt find ans for my probem in any previous Discussions.We have 3node cluster CUCM 8.0, i configured MOH perfectly and it was working fine till last week...when i check this w...
Here is the solution..
!--- This is an example of how to configure the bearer cap parameter
!--- on a Cisco AS5300.
esc-5300-2(config)#voice-port 0:D
esc-5300-2(config-voiceport)#bearer-cap ?
3100hz enable 3100hz
speech enable speech
es...
Thank you Friend.When I had the same issue very long back I worked with tac and it was bug with code i was using on gatewasy for MGCP and I guess they added the same command to solved the problem.
Aokanlawon, You are absolutely right and its my bad i totally forgot about the switch version.I was in a impression that i selected upgrade and reboot with new version when its done.So i was expecting to see new version CLI.What ever...
I am sorry...I didn't abused or used any hurting language in these post....what ever I posted it was simple and straight forward that's it....even you think it was abusing language...I apologize...I am sorry for that....Thank you so much...
