About ciscoprolin

ciscoprolin · 12-27-2024

Hi, has anyone had the chance to play with "AI-Enhanced RRM" in Cisco Catalyst Center ? What has been your experience ? We have quite a few RF profiles and wonder if the cloud-based RRM really does a good job so we can lean back and stop using our ow...

ciscoprolin · 09-24-2024

Dear All,we have P2P blocking enabled on our Identity-PSK based SSID on our C9800 running Rel. 17.12.4 but now there is the need for some wifi clients to see each other while the clients still should be P2P blocked. There is a new feature called "P2P...

ciscoprolin · 06-25-2024

Dear All,after hesitating for a long time we finally reenabled FRA on our new C9800 platform 17.9.5 and so far it looks good.Question: Does anyone know how we can best verify the FRA operations ? With the CLI command "show ap fra" we just see the cur...

ciscoprolin · 06-21-2024

Dear All,after hesitating for a long time we finally enabled Flexible Radio Assignment (FRA) on our C9800 Wireless Controllers running IOS XE 17.9.5 for 5/6Ghz as well as for 2.4/5Ghz.We remember some 4 years ago when we were still running on AireOS ...

Recommended RF profile settings for 6Ghz · 03-25-2024

Hi guys,we are planning to use the 6Ghz band on our brandnew CW9166 APs and need to define 4 different RF profiles for various environments: for standard office / high density areas / outdoor / IoT and LABAs our experience with WiFi6E (6Ghz) is stil...

ciscoprolin · 12-27-2024

Thanks very much it's good to know that AI RRM should do a fine job in dynamic environments as we indeed have one (Education).

ciscoprolin · 09-30-2024

it looks like the solution to this simply is assigning the identical IPSK to all clients which should be able to see each other. Just F Y I. We tested this out successfully (with P2P Blocking Action: Allow Private Group).

ciscoprolin · 09-26-2024

Hi, yes we're using iPSK with FreeRadius (not with ISE) but for this private group feature for P2P blocking exceptions we'd like to start testing it without RADIUS by just manually creating a private group on the WLC and assigning MAC addresses to it...

ciscoprolin · 03-26-2024

Thanks. Country code is CH (Switzerland)

ciscoprolin · 03-27-2023

Thank you very much. That really helped a lot.

Member Since	‎06-07-2007 03:00 AM
Date Last Visited	‎01-03-2025 04:01 AM
Posts	145
Total Helpful Votes Received	37

User Statistics

User Activity

AI-Enhanced RRM in Catalyst Center experiences

C9800 - P2P blocking: allow-private-group on a I-PSK based SSID. HowTo

Verify C9800 - Flexible Radio Assignment Opertions in Catalyst Center

Flexible Radio Assignment - Report in Catalyst Center 2.3.5.x

Recommended RF profile settings for 6Ghz

Re: AI-Enhanced RRM in Catalyst Center experiences

Re: C9800 - P2P blocking: allow-private-group on a I-PSK based SSID. H

Re: C9800 - P2P blocking: allow-private-group on a I-PSK based SSID. H

Re: Recommended RF profile settings for 6Ghz

Re: WLC Syslogs: Failed to send a message to the message queue object: