Hi All,The architecture in the attachment doesnt require redundancy and hence has a single N5k with N2k as FEX. The setup is working fine except for the management vlan and mgmt 0 interface being down.As of now, mgmt0 interface has no link connected ...

Hi All, Thanks in advance.Please let me know the procedure to configure diverse routing between WAN uplinks to the HSRP paired WAN router from LAN switch - Cisco 3750 in the setup explained in the attachment. Diverse routing is needed in the WAN rout...

Hi All,Thanks to this forum and its members for all the support I had received until now.We have our DataCenter core switches composed of redundant 2*Cisco 6504 switches. The redundant switch / Chassis went down due to hardware issue and we have got ...

Hi All,Thanks in advance. We have our WAN setup as explained in the attachment herewith. As of now, We have a IP 1 configured as HSRP IP in the LAN switch end at Site A and Site B. As per the HSRP priority, Site A's WAN router will preempt to be the ...

Hi all,I have a stack of 4*3750 switches with 52 ports each (48 + 4). Is it possible to have port channels above 48th one in the stack in any way? Thanks and Regards,Balachandhar S