Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We deployed Cisco WLC and currently use the ISE/RADIUS to authenticate wireless users for network access. This is in a good working state right now. What I’m trying to do is to enable TACACS on the WLC and authenticate admin users for management acce...
We use ISE/Radius to authenticate AnyConnect VPN users. Currently all users are in the ISE internal database, and the policy is easy: From the VPN firewall using Radius protocol, authentication will go to internal database. Now we would like to migra...
This seems to be a simple situation, but I'm having some trouble with, as NX-OS is somewhat new to me.
Two Nexus 5K switches connected with a direct link, and VLAN 99 is the only VLAN configured on that link (dot1q trunk). I'm trying to peer the tw...
I'm running a test lab with simple routing redistribution. Basically the network looks like this:
OSPF router in area 0 ----- OSPF ASBR with one leg in OSPF area 0 and the other leg in EIGRP ---- EIGRP router
The OSPF ASBR is doing bidirectional...
I'm having an issue with the FWSM that is not clearing the idle UDP connections properly. The configuration has the UDP idle timeout set for 2 minutes. But I'm seeing the UDP connections not cleared until 30 minutes. timeout conn 1:00:00 half-close...
Mike, after a few tweaks with advanced options and authorization policies, your suggestion is now working as expected on my testing lab. Thank you as well for your input! Appreciated!
Hi Mike Thank you as well for the help! As I said to Francesco, who provided the same solution, I'm going to give it a try in a testing system and update the post. Joseph
