Hi Tony, The defect referenced by jbordelon52766 is CSCwj67039 and the fix was included in App version 44.6.0.29462-Jon

Hi Derek, If you have an existing Server Certificate and you click through to generate a new CSR, the existing server certificate will continue to work. It will place the CSR and new private key into a separate folder on the system from your current ...

Hi Thomas, Unfortunately this sounds like the expected behavior,  T3 calls are only supported with Telepresence Server Models 8710 and 7010.  With Conductor in place in front of a 8710 or 7010 TPS, if the Conductor is configured for a B2BUA deploymen...

Hi, What device type are you using in CUCM? With CE software on the DX series, it requires a device type of "Cisco Telepresence DX80" and not the "Cisco DX80"  device Type. -Jonathan

Sounds like the CUCM to Conductor side of the trunk is fine. Does your CUCM use a root and an intermediate in its certificate chain, and if so does the Conductor trust the Intermediate certificate in the trusted root CA list? -Jonathan