Hi, I have exactly the same proble and your method "Disconnect SSID, wait for a few minutes, reconnect and enter the original URL to redirect to guest portal with the new session-id." has not resolved my problem. Any ideas ????
... View more
Hello, We are facing a problem and can't figure out anyway to get around it. We want to deploy Cisco IP communicator and Cisco Mobile to our employees. The issue is with registering all the devices in the Call Manager. Registering all the phones is already painfull for large organizations, but doing the same with laptops and mobiles is simply not manageable. Users change laptop and mobiles phones way more frequently than a fixed phone. Registering all the laptop ethernet and wireless MAC address and SmartPhones mac address in the Call Manager and keep all those up to date is too much time consuming and simply not duable. I'm looking for a way to allow any device to register to the Call Manager. Yes there is the auto-registration feature, but it was not meant to be permanent and phones are assigned a DN from a pre-defined pool and use a pre-defined CSS. The problem is that in our case we support offices in different countries on 1 single Call Manager so after devices auto-register, we still need to move them to the appropriate Pool assign them the appropriate CSS, etc... In the ideal world I would like the device to auto register, get an infrastructure DN, be placed into the appropriate pool, assigned to the appropriate CSS... based on the subnet of the device. Is there any way to achieve something similar with the Call Manager (we are running 8.5) ? As a side note, I don't really understand the need for registration for security. In most cases a device needs to have a certificated or be registered somewhere (AD) to get an IP address, so just the fact that the device has an IP means that it is a trusted device....
... View more