Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I'm researching the new ASA firewalls to replace an existing one. I'm using the installed ASA primarily as a basic firewall and NAT router, but it has more than one internet connection and the device has previously been used as a VPN server.
I'm phas...
I have a pair of 4500-X switches running IOS-XE version 3.8.1, and in Cisco Network Assistant 6.3 they don't appear to display correctly.
Yes, I know the host names say '4900.' I fixed that a moment ago, but that made no difference to this display. ...
I have a network with pairs of 3560-X switches servicing nearly 150 access switches (44 access switches per pair) and several hundred clients. The access switches are a mixture of SF100-D (unmanaged) and SF200 (managed). I have an odd business requir...
I'm looking at upgrading the IOS software on a pair of 4900M switches because of some dropped packet behavior in 12.2(46)SG and also to add crypto (HTTPS and SSH). The latest version of 12.2 is 12.2(54)SG1.I'm accustomed to upgrading Catalyst switche...
This may or may not be a spanning tree problem but it's the first thing I'm thinking of.We're growing a pretty large switch network with a combination of managed and unmanaged switches (yes I know, bad idea, tell that to Finance) that use Catalyst sw...
Cisco TAC reproduced the problem; apparently Leonardo's getting a worse result with no ports displaying at all. So we know this is a problem with Cisco Network Assistant.
I can deal with it until CNA gets fixed, since much of the functionality I need...
Ended up opening a ticket with Cisco TAC. So far, no progress, though one suggestion to try CNA 6.2 allowed an older 4507R switch to become visible.
--
Please elaborate what do you exactly want to achieve, do you want to make use of two ISP connections for outbound traffic.
I'd like to split the outbound traffic to take advantage of the additional bandwidth. I'd also like to have redundant connect...
I ended up with this problem after migrating from an old 4507 chassis as my core L3 switch to a pair of 4500-X L3 switches. Windows just would not sync with the 4500-Xs and the switches would call my PDC insane as well.
Ended up syncing the PDC again...
Is this seriously a problem after nine years?
Back in 2012 I converted the CNA 5.8 kit into a Windows Installer package so I could do unattended installations. I also had to add a post-install script to change some folder permissions to accommodate U...
