Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello all,Getting the following alarms.System Alarm [Collector] Value too long (<acs_instance> TacacsAuthentication)This coming from multiple servers, but mostly its generated by the most utilized ACS server.At this time, we are running ACS 5.3.0.40....
Version 7.0.116.0 wlan psk format shows as ascii in gui but is configured as hex.Appears to be cosmetic bug as clients still work ok when entering in correct hex key.ThanksHas anyone seen this on WLC controllers. My lab 2106 also has same trouble wi...
Hello all,I have the following switch with CSM moduleWS-C6506-E with CSM------------------ show module ------------------ Mod Ports Card Type Model --- ----- -------------------------------------- ------------------ -----------1 4 SLB Application Pro...
Hello Cisco Forum Users.Question regarding 7937 IP Conference Phone with CME 7.1Does the 7937 use CME router clock timezone or telephony-service timezone?Router timezone = UTC the default for consistent timestamps across network.Telephony-service tim...
Hello Cisco Forum Users,I have a Customer with 6509 getting the following logging message.Feb 9 23:31:06.622 PST: DFC1: EARL Vlan Statistics Process: No iccshim packet createdFeb 9 23:35:06.809 PST: DFC1: EARL Vlan Statistics Process: No iccshim pa...
Hello Amjad,Thank You for the reply.Our Customer will not upgrade without specific proof that the above ios defects are or will be corrected in the latestrelease. The Cisco release notes 5.3 and 5.4 does not mention correction or enhancement now reso...
Hello Scott - thanks for the reply.You misunderstand the problem.Try setting the PSK key for HEX format in the gui. After you setup the hex key it works ok for client butthe gui screen still shows it to be ascii.
Hello all and Cesar,Thank You for your reply.What other official issues are you referring to the 828 days ?Our Customer will not want to reload unless necessary.
Hello Logan,Thanks for the reply. Always had the type 7937 configured per below.ephone 8mac-address 0004.F2E8.225Dtype 7937button 1:8Attached configJust a side note I have 7936 in lab environment with same symptom.Thanks again.
