Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi All, UCS-C260 currently running ESXi-5.0.0-469512-standard with the following license;Product: VMware vSphere 5 Foundation Licensed for 2 physical CPUs (unlimited cores per CPU)Expires: Never If the ESXi is upgraded from 5.0 to 5.5 do you need new...
Hi there,This is happening across 5 remote sites which just got cutover from basic Key systems to IPTel.PSTN into FXO, PLAR to IP Phone and no Caller ID, just comes up with unknown number. Caller ID working on outgoing calls but thats the carrier set...
Hi,Have a bunch of analog wireless DECT phones that all connect back to an ASCOM box. The ASCOM connects to the LAN for connectivity back to the CUCM which is version 6.1.2.1000-1All of the DECT phones are configured as Basic 3rd party SIP devices on...
Hi,Cannot get the nokia e61i to register to cucm6.0.1 using SIP - there is no intellisync installed.Can somebody list the configs required on both CUCM and the nokia.Thanks
Guilherme,did you ever sort out your Caller-ID problem on the FXO ports?I have exact same problem, PSTN line works with Caller-ID when connected to analog phone but when connected to router with FXO port I just get Unknown Number
Hi,If you pull out the disk from slot 1/ID 1 then it goes back into slot1.I used to pull the disk from slot1, put another disk back into slot1 and allowed it to mirror and then did any patches/upgrades.Only once I had to revert back and then it was a...
