Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
I have a Cisco Catalyst 2960S. I am trying to lab with it. There is nothing but the switch and a laptop. I set up a bare bones config and enabled routing and set up a DHCP server on the switch. I can see that there are DHCPDISCOVER incoming but not r...
Greetings, I have a Cisco 3640 router with IOS v.12.3(16) It does not recognize the crypto commands. What reading I have been able to find says that it should be there. Any idea? Thank you. #sh version Cisco Internetwork Operating System Software IOS...
Hello,Spent many hours serching and unable to find answer that fits senario.I have tried several ways to skin this cat but I always get either "portmap creation failed", "deny due to DDNS query" or "no translation group found".The way it is currently...
I am having trouble seeing why I am unable to ping an interface that is local to the router while in an SSH session on the router. Although we are doing some policy based routing I can not figure out why I can not get a reply from the local interface...
I have a pix running 7.0.1 and I have configured ssh access on inside and outside interface. I have all of the settings the same on the interfaces. If I connect it to the inside network I can connect via ssh, http or ASDM. When I connect it to the Ou...
Here is how my working configuration turned out:!
version 12.2
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
service unsupported-transceiver
!
hostname switch-FOC1832W13K
!
boot...
I did reconfigure the switch as suggested and it is working. I added an exclusion for the vlan1 address.I think the documentation for DHCP configuration needs to be changed. It does not include any reference to requiring a vlan interface IP address. ...
if a dhcp server and a client are on the same L2 segment then dhcp should hear the broadcast and respond. vlan being default and the laptop (client) is in vlan1 then it should be able to negotiate. In my production environment I have a Windows DHCP s...
Not sure why your post came to my email but isn't showing on the thread in the community post.Anyway. I started off without any IP address on the VLAN1 interface, shouldn't that have worked. DHCP broadcast is a layer 2 activity isn't it?The configura...
Hello,We have a pair of 1530i that won't quite reach to furthest area we need. Does the 1560 have an increased range?I am not able to find range estimates for the radios. I did find a range estimate for the 1530 in the deployment guide.I am not able ...
