Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi folks,We are rolling out a new VPN infrastructure utilizing ASA 5520's (one active/standby cluster at each of our two sites) and making the conversion from the old IPsec client over to AnyConnect 2.5 clients. We do have AnyConnect Premium licenses...
Hi all,I have a C6513 system that is in hybrid mode (SE = CatOS 8.2(2) and RP = IOS 12.1(22)E1) and I'd like to upgrade it to native IOS (finally :). I've looked at Cisco DocID 12031, which specifies on pg19 that it a good idea (although not required...
Hi all,Had a strange routing problem tonight between a L3 switch that acts as the internal router for a branch office, and the ASA that is the Internet gateway as well as the tunnel endpoint for the VPN to our main site. The L3 switch runs EIGRP on a...
Hi all,We have just recently cut over from an older core switch/router platform (running CatOS 8.x) to a newer platform running IOS 15. So all the SVI's for our VLANs moved over from the old platform to the new, and a trunk link (4x1GB etherchannel) ...
Hi CSC'ers,For DR purposes, we have two VPN tunnel endpoints on different ISP's at our head-end office. At our branch office, we have an ASA. I am wondering if for the purpose of re-pointing the tunnel from the branch to the DR endpoint at the head-e...
Have a similar problem, low data transfer rate and am also seeing packets dropping between end nodes... Here's the result of an iperf test between two nodes which both nego'd a 1Gb/FDX link with the switch:server229:~$ iperf -c server231 -t 10 -d----...
Hi Karsten -I have read that Advanced Host Scan is only needed for remediation and mobile device checking... Hopefully we don't need to buy any more licenses (no matter how inexpensive!)Sent from Cisco Technical Support iPad App
Hi Tarik,I have read that such checks can be done, but unfortunately a Windows-only solution like the one you mentioned won't work for our environment... Looks like we may need to use cert's.Sent from Cisco Technical Support iPhone App
Does anyone know if the boot image IOS ver has to match the new native IOS ver? (I.e. can I just use the current boot img I now have on the MSFC?)Sent from Cisco Technical Support iPhone App
