Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,I'm wondering if anybody has done NSX DFW mode only on top of ACI? I have a customer who may want to run both. I see plenty of stuff where full blown NSX is running on top of ACI as an Underlay only but if I want to leverage App Profiles and us...
Hello,Anybody else seen the issue where it takes like 15 seconds to sh a running-config on the 1000v. Fairly annoying for sure. I've seen this in the past and resolved it somehow but not sure. After having an issue and having to rebuild my 1000v it's...
I'm having a strange issue now that I have valid licenses installed on my VSM. I got 4 of my hosts added to the VSM with the new licence just fine. However I'm getting the following errors now with the other two hosts I'm trying to add. Consequently ...
What's been the experience with running the 1000v VSM on a UCS blade where the Blade is also running a VEM? Thought I had a solid configuration with HA failover but something happened and it all blew up... and all 6 of my hosts disappeared from the V...
Anybody have any good info on L3 AIPC mode becuase Cisco hasn't updated their Docs yet. I like the idea of L3 and not having to have the Packet and Control VLAN's around. At least that was my understanding until there was a crash. Now I'm dealing wit...
I have a healthcare customer as well who would like TrustSec support on 9504 platform running in standard NXOS mode. Can anybody confirm it's on the Software roadmap?
Also forgot to mention it all works fine if I put the phyical uplinks on a regular vSwitch in Vlan 800 and move the VM's to it. Did that to validate the UCS and 7k config.Thanks,Jason
Hi Robert,Thanks for the quick response. I just opened TAC Case as well. * To disable one of the links in the port-channel I'm removing one of the uplinks from the Host configuration within the DVS section of the host configuration within Vsphere. As...
Not sure this is fixed totally. I'm running a UCS system connected to Dual 7k's as well. Also, running SV1.4a release. My issue is with with DHCP. After many hours of troubleshooting I've been able to isolae the problem down to MAC-Pinning as well. W...
Sorry I should have replied in case somebody else runs into this problem. The issue I found was that I was running L4 AIPC mode but on the same subnet.. so my VSM was on the same subnet as my VEM's. Ikv didn't like that. As soon as I moved the VSM to...
