Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello!i have prime inf 3.4i'm trying to make Templates that clear all interface counters and deploy to my switch.but when i deploy - Prime make error for timeout.On log i see that he waiting to conferm my command"Clear "show interface" counters on al...
Hello!I have Cisco Prime Infrastructure 3.4Can anyone suggest the correct syntax and is this possible? I make template with 1 command and want to start this command over 500 switches"show interfaces status | redirect tftp://a.b.c.d/hostname.txt"but i...
Hello!Can anyone suggest the correct syntax and is this possible? I have a lot of switches (over 500), and I am trying on each switch to execute the "show int status" command and save the output on tftp server with the name of the switch on which the...
Hello!Can anyone suggest how to solve this problem? We have over 300 ip-phone model CP-7961G, firmware — *SCCP41.9-4-2SR3-1S* (last firmware)We have over 40 switches model Cisco WS-C2960X-48TS-L (15.2(7)E0a, but the older version have the same effect...
Hello!
A have prime inf. 3.4.1
i'm trying to distribute image from prime to swtiches.
In menu Inventory / Device Management / Software Images
I'm upload firmware to prime, then do distribute job for 11 switches with no rebooting.
the job are stil...
it is not the end....i try to write this command on all of switch that i have with this problame.after some time mac on the port that work "OK" disappeared.... and we have another problame
yes, it is solved our problame.But it is intresting - bug date 2016/2017 year.we have latest firmware flash:c2960x-universalk9-mz.152-7.E0a.bin", and we have the same problame...
no!After power off ip phone - port is going down and after 30 second port is going up and on the port the status is connected until it is either disabled by command shutdown or physically turned off. Yes - LLDP and CDP we turn off/on - problame the s...
Still running for 48 hours ? normal time for this job 15 minutes.
all devices are available.
What is most interesting - restarting ncs services did not give a result.The problem was solved in this moment only through halt and power on
