When VSM services part fails, the failure will not propagate to ABF, which will result in black holing of the traffic instead of switching the traffic to backup VSM, if one exists
To track the reach-ability between Ingress servi...
In certain network scenarios where network admin require correctly process exception packets in MAPT inline solution than below document help community to understand ASR9k In-line CGN solution using VSM card.
IN-LINE MAP-T / ...
1) What is CSM and how does it work?CSM (Cisco Software Manager) Aka SMU manager is a java based application which helps user for software management on ASR9000/NCS6k and CRS routers.This application remains in sync over public infrastructure with ci...
In Cisco with VSM-500 we support destination based NAT and dont perform uRPF.
VSM don't track ingress or egress interface for traffic receiving/forwarding since its confine to its logical interfaces which are serviceApp IN and service Ap...
With error from output sh l2vpn xconnect detail from ASR90x router, it says :PW: neighbor 220.127.116.11, PW ID 181, state is down ( local ready ):
this possibly may down due to either PW config or label allocation issue.
best results about this xconnec...
We have 2 types of redundancy support on VSM card.
1) 1:1 redundancy
2) n:1 redundancy.
details you get get from link https://supportforums.cisco.com/discussion/13038731/ism-100-vsm-500-migration-and-redundancy-managment-guide-key-perfo...
Ok lets understand the solution requirement / TMS - vSP role and than config flow here:-
1. VSM-500 card
2. One peak-TMS ( Threat management system)
3. vSP ( this is collector which manages TMS)
4. Arbor DDoS license