About Wei Ting Lin

Wei Ting Lin · 11-27-2022

Hi all I stacked two C1000s, and set gi2/0/39-40 as etherchannel, the interface is default config, but an error message appears, do I need to do other settings? switch(config)#interface range gi2/0/39-40switch(config-if-range)# switchport mode trun...

Wei Ting Lin · 02-10-2022

I have a new batch of computers, the network card chip uses intel,And both WLC OS and wifi driver have been updated to the latest version,But NB sometimes still disconnects from the connection.Has anyone had the same problem? I see the following mess...

Wei Ting Lin · 07-25-2021

I have six stacked 9200 with an error message,The version is 16.12.4,PowerOn uptime is 35 weeks, 1 day, 8 hours, 47 minutes log:Jul 26 2021 12:22:08.348 TPE: %IOSXE_INFRA-6-PROCPATH_CLIENT_HOG: IOS shim client 'chasfs' has taken 272 msec (runtime: 27...

Wei Ting Lin · 12-05-2022

I have tried your way, but the device still shows command error.

Wei Ting Lin · 12-04-2022

i try upgrade to 15.2(7)E6 , the problem is slove.

Wei Ting Lin · 11-28-2022

I tested mode on, but it still doesn't work, and the release note didn't mention similar bugs.I will try to test the new version.

Wei Ting Lin · 10-02-2022

can you sharing screenshots and exact steps? bensonl@idtech.com.tw

Wei Ting Lin · 06-28-2022

I am having the same problem too. I was running 16.12.3 upgrade to 17.8.1 Occurs after upgrade reboot on a 2 9200L-24T-4X stack. but 9200L#1 is fail, #2 is normal, that's really weird.

Member Since	‎11-17-2013 06:02 PM
Date Last Visited	‎01-19-2023 06:02 PM
Posts	10
Total Helpful Votes Received	20

User Statistics

User Activity

C1000 stack LACP problem

WLC Abort Reason:DOT1X RESTARTED DUE TO EAPOL-START/CLIENT ROAM

IOS shim client 'chasfs' has taken 272 msec (runtime: 272 msec) to process a 'stack chasfs fd' message

Re: C1000 stack LACP problem

Re: C1000 stack LACP problem

Re: C1000 stack LACP problem

Re: ESA auto backup

Re: CSCvm55208 - C9300 Mainboard hardware authentication failed. Abort