Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hey guys, I have a 6509E that we will be inserting a FWSMv3.1 into in the near future. It is currently running 12.2(18)SXD7b.bin. From what I understand the minimum requirement for FWSM is 12.2(18)SXF2. A few weeks ago we attempted 12.2(18)SXF10(now ...
Maybe One of Two Things:1) Auto-Reg is not on the server the phones are registering to (Subscriber).2) You are out of licenses.For kicks, add the phone manually with the MAC and see if it registers then.Regards,
Hello, you have the right interface command:Are you using a netflow application to see this graphically as the output from "sh ip cache flow" is kind of cryptic (hex output).If you get a netflow analyzer such as Solarwinds you can export these flows ...
We are going through these talks now with Cisco and DMVPN has limitations with EIGRP you have to look out for. Look at the SRND from Cisco on DMVPN as it requires a great deal of hardware for a small amount of spokes. http://www.cisco.com/en/US/nets...
Forgot to add my question, is anyone running a similar hardware configuration with the FWSM and if so, what IOS revision are you using in production?Switching is standard stuff with some LAG ports along with EIGRP as the primary routing protocol.Than...
