Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all, i have attached a file here where it shows a simplified diagram for my DC. my issue is VM2-Site_2(red) is able to talk to VM1-Site_1(red), but VM-Site_2(blue) is not able to talk to VM1-Site_1(red). -- keep in mind, this is not ACI, i am co...
Hi all, i have attached a file here where it shows a simplified diagram for my DC. my issue is VM2-Site_2(red) is able to talk to VM1-Site_1(red), but VM-Site_2(blue) is not able to talk to VM1-Site_1(red). -- keep in mind, this is not ACI, i am co...
Hi experts, I am facing this issue with 3702 Access point, where randomly sends BPDU to the switchport and err-disables the port. obviously i have bpdugaurd enable on the port and i would like to keep it this way. the image that i am using on the AP...
IOS Router ------>> ASR9K-IOSXR ------->(( MPLS backbone
...................EIGRP .................................MPBGP.............................
!
!
IOS Router send the Default route which was redistributed from a Static route towards the ASR9K....
Hi all, I need to enable MPLS on my 7600 router sub-interface, do i need to enable MPLS on the physical interface as well? or it would work with only enabling it on the sub-interface. thanks in advance
Rais,
Default-information originate did work.
i was missing the point that BGP is a little more restrict about advertising/redistributing default from another protocol to it.
thanks so much for the reply.
Hi Ashish, what if i only want to forward a Default-route from CE1 (which is receiving it from another CE) to CE2. and CE2 doesnt need to know any specific prefixes from CE1 expect the default-route. well this is the multi-home. I am trying to play...