Hi all,
Can anyone be able to better explain aci-toolkit and cobra-sdk, particularly:
- How the tools differs with one another?
- Advantages of each over the other
- When to use the tool, especially in a real world environment.
I have seen both ...
For some reason, I cannot seem to login to NETCONF/YANG and RESTCONF on IOS XE(always on sandbox) since yesterday.I am getting a Permission denied (password) even though I'm using the right credentials. Does anyone else has this issue?
Does Cisco CP-6941 has a hard factory reset function similar to 3491682850*#?
The only factory reset that I can find on the documentation is 123456789*0#
Noob here. I am having problem configuring ASA to statically nat a server on dmz directly to an outside interface on port 80. I was able to successfully nat it using another IP address (12.12.12.5) but not if I used outside ip (12.12.12.2). Here's a...
I am trying to simulate DHCP with ip-helper address (Please refer to the attachment for the topology).My vlan is 10.10.5.0/24. I have also created a routed port connected from my switch to router (10.10.10.0/30). I put ip helper-address 10.10.10.1 o...
correct me if I'm wrong, but I think air-LAP will require a wireless controller.
https://www.cisco.com/c/en/us/support/docs/wireless/aironet-1200-series/70278-lap-faq.html
I'm not familiar with camera/video but what I can suggest is to start with QOS.
Also if you have any network monitoring set up, you can verify if it is really a bandwidth issue.
A few things that I can think of:
If it happening frequently. I suggest running a wireshark so you can see packet that is coming in and out during the issue and before the issue will occur.
Also, check port status and security?