Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I have an issue where the 2802i AP are not join the 2504 wlc the firmware is 8.2.151 which is reccomended.
The 2802 get the correct ip and option 43 hex value set correctly to point to the wlc mgmt address but the 2802 are not hitting the contr...
Hi,I have generated the following CSR and trustpoint, but it is not showing in ASDM, I can see it in the cli via "show run":crypto ca trustpoint ASDM_TrustPoint0 enrollment terminal fqdn mydomain.com subject-name CN=myCN,OU=IS,O=JSP,C=GB,St=United Ki...
I will be setting up four WSA for a guest environment and a enterprise environment. For the guest environment what certificate do I upload to the WSA? A enterprise root certificate or wildcard certificate? Any direction you can provide would be appre...
Hello, Currently have Cisco AP541Ns which are in a cluster and will like to add an different model AP into the network, which is the WAP551. I would like the same SSID config on both so clients can do roaming between the two without issues, Can you s...
Hi, Current dhcp scope is running out of IPs and would like to add a secondary IP range for vlan 50 and I was hoping the following will work. Extending the current ip range is not an option at the moment, so the PC's connected to switch ports configu...
Hi Larry,
What did you do to make this work, because I am having the same problem with securecrt
I get the error message "Xmodem operation was canceled by remote peer"
I am trying to trabsfer on to a C3650, please help?
Hi Ferdinand, Can you provide the attached PPT file as I would like to take a look at this document. As I am also doing a comparison between WSA and Firepower. Thanks
Jernej, Yes this is for https inspection for guest and will then eventually be used in the corporate environment. In regards to the client receiving an invalid certificate if I don't deploy a CA certificate, would the same happen for a wildcard cert...
Ken, If I dont to decrypt HTTPS but still want the traffic to be inspected for URL and web reputation, do I need to upload a root certificate still? I would have assume not as I do not want to decrypt HTTPS but the GUI doesn't allow me to enal HTTPS ...
Hi Eric, I have an similar issue with the WAP 551 where they unresponsive after an few days and I have also tried the suggested workaround, so we will see what comes from that. Also I would like to ask if upgrading the firmware from 1.0.3.4 to 1.1.0...
