Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi all,I saw that without large deployment add-on license the appliance can support up to 500 AAA client. Is that concurrent or total? E.g. customer might have 2000 AAA client but only 400 clients will authenticate. So in this case do I still need to...
Hi,I have this weird scenario whereby my customer wanted 3 VLANs and each VLANs should have the same IP.PC1 (192.168.1.2/24) in VLAN1.PC2 (192.168.1.2/24) in VLAN2.PC3 (192.168.1.2/24) in VLAN3.Is that even possible?
Hi,The supervisor engine 720 for VSS comes with two X2-based 10 Gigabit Ethernet ports, two Gigabit Ethernet Small Form-Factor Pluggable (SFP) ports and one 10/100/1000 gigabit port. My question is are all the ports active at the same time?What if I ...
Hi all,Recently I did a test with 2x 2960 and 2x SDH equipment from Haliplex. According to the vendor they're on Layer 1 only.As per the diagram, we have a Catalyst 2960 on each end. Both Gi0/1 on the 2 switches are configured as trunk. So I have 2 l...
Hi, I wanted to ask does CISCO1841 support 2 different dlsw remote-peer? The thing is we have the below configuration running fine on a CISCO2600 but not in 1841.ip subnet-zero!isdn switch-type basic-net3isdn voice-call-failure 0!dlsw local-peer peer...
Hello Karthik. Thanks for the reply. My local Cisco SE told me that the unique IP addresses is based on Network Access Device like switches or routers. It doesn't care how many laptop in customer environment that wants to authenticate with the ACS. I...
Hi all, I just got the full information on the setup that my customer wish to do. Basically this is a railway track. There are a total of 12 train stations here. So each train station will have a L2 switch.Station 1 Switch 1 VLAN 1Station 2 Switch 2 ...
