Hi, I’m using your services because I can’t deal with that issue. I used to make an automatic backup of my CMX, but with the version 10.6 I am stuck. I’ve made a backupschedule and wanted to use the postbackupschedule script to send the backup on other equipment. Unfortunatly, whatever I make, I have to use SFTP, so to put my password in the command prompt and with the new big restriction coming with the version, I can’t use lsftp, expect allowing to do so. Is anyone have found a way to overpass this issue or found a way to make automatic backup with the file send on a remote server? Thanks by advance.
... View more
Hi all, I can't receive any fax on only one DID. I have one 2901 on MGCP with e1 In my case this DID is for a FAX, there is my debug isdn q931 when I try to send a FAX *Dec 4 21:46:39.214: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8 callref = 0x6532 Bearer Capability i = 0x8090A3 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98381 Exclusive, Channel 1 Calling Party Number i = 0x2183, '955XXXXXX' Plan:ISDN, Type:National Called Party Number i = 0xA1, '3894' Plan:ISDN, Type:National Sending Complete *Dec 4 21:46:39.226: ISDN Se0/0/0:15 Q931: TX -> CALL_PROC pd = 8 callref = 0xE532 Channel ID i = 0xA98381 Exclusive, Channel 1 *Dec 4 21:46:39.226: ISDN Se0/0/0:15 Q931: TX -> ALERTING pd = 8 callref = 0xE532 Progress Ind i = 0x8088 - In-band info or appropriate now available And after 3 minutes trying i have this end: *Dec 4 21:49:39.278: ISDN Se0/0/0:15 Q931: RX <- DISCONNECT pd = 8 callref = 0x6532 Cause i = 0x80E6333031 - Recovery on timer expiry *Dec 4 21:49:39.310: ISDN Se0/0/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x6532 *Dec 4 21:49:39.330: ISDN Se0/0/0:15 Q931: TX -> RELEASE pd = 8 callref = 0xE532 *Dec 4 21:49:39.338: ISDN Se0/0/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x6532 Cause i = 0x80D1 - Invalid call reference value This fax is on gawteway VG224 but i have others FAX and it's works properly. Somebody know this issue? Thanks.
... View more