Hi all,
I can't receive any fax on only one DID. I have one 2901 on MGCP with e1
In my case this DID is for a FAX, there is my debug isdn q931 when I try to send a FAX
*Dec 4 21:46:39.214: ISDN Se0/0/0:15 Q931: RX <- SETUP pd = 8 callref = 0x6532
Bearer Capability i = 0x8090A3
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98381
Exclusive, Channel 1
Calling Party Number i = 0x2183, '955XXXXXX'
Plan:ISDN, Type:National
Called Party Number i = 0xA1, '3894'
Plan:ISDN, Type:National
Sending Complete
*Dec 4 21:46:39.226: ISDN Se0/0/0:15 Q931: TX -> CALL_PROC pd = 8 callref = 0xE532
Channel ID i = 0xA98381
Exclusive, Channel 1
*Dec 4 21:46:39.226: ISDN Se0/0/0:15 Q931: TX -> ALERTING pd = 8 callref = 0xE532
Progress Ind i = 0x8088 - In-band info or appropriate now available
And after 3 minutes trying i have this end:
*Dec 4 21:49:39.278: ISDN Se0/0/0:15 Q931: RX <- DISCONNECT pd = 8 callref = 0x6532
Cause i = 0x80E6333031 - Recovery on timer expiry
*Dec 4 21:49:39.310: ISDN Se0/0/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x6532
*Dec 4 21:49:39.330: ISDN Se0/0/0:15 Q931: TX -> RELEASE pd = 8 callref = 0xE532
*Dec 4 21:49:39.338: ISDN Se0/0/0:15 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x6532
Cause i = 0x80D1 - Invalid call reference value
This fax is on gawteway VG224 but i have others FAX and it's works properly.
Somebody know this issue?
Thanks.
