Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, We are currently running Sup2t sup card on a 7609 chassis, I need something more powerful to push more than 1million routes. Is there a supervisor card that is capable of greater than 1 million routes and compatible to the 7609 without replacin...
Hi, I am currently reviewing possibilities to blocking specific traffic on edge of network, E.G transit/peers to ensure if we get any malicious/unwanted traffic, we would be able to prevent this from occur. I came in and saw ACL's on the CORE, which...
Hi Guys, I am currently trying to configure OSPF and NAT with a 3 cisco router topology, I can ping the destination from my G0/0 interface 192.168.1.1 towards 10.1.1.1 loopback IP so OSPF is working and has built an adjacency with the connecting neig...
Hi Cisco community,I have come across information that is contradicting, I have found Cisco books that say TCP and the internet that says UDP.I am looking for a clear cut answer with preferably a explaination to the reasons behind it and potentially ...
Yeah, I never really thought of an FW on the edge, my concern is it's more rack space and more money to implement something like this, as we will need a few in each DC to provide enough redundancy for multiple links to allow for multiple terminations...
1) Access to my web server (gateway) from the Internet.2) Access to my mail server from the Internet.For the first two points, do you have NAT configured? If so, the ACL's are incorrect from my memory, as I believe it checks the ACL before NAT within...
1) Access to my web server (gateway) from the Internet. -> Do you have NAT configured for this? 2) Access to my mail server from the Internet. -> Do you have NAT configured for this?If you do, from my memory pre 8.3 you have ACLs checked before NAT i...
To show the received routes without soft configured is:show ip bgp neigh x.x.x.x routesI've always used this and it's never failed me.Just to addon, it won't show rejected routes however.
