Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi to All,We are on the process of deploying 2 Nexus 7k, 2 nexus 5K and a bunch of nexus 2k in our data center, we use vPC inside our data center, we do have UCS is our DC which is currently connected to our 6509E core switch via port channel with 1G...
Hi to All,We are in the process of migrating our current DC and DR from 6500 Series and FWSM to N7K, 5K and 2K with ASA 5585 also. We have two existing data center connecting via redundant dark fiber. In our new design with Nexus 7K, 5K and 2K with A...
Hi to All,I am in the process of upgrading the LMS 4.2.2 to 4.2.5 withing the same server : Windows 2008 64bit R2 with 8GB RAM (VM) as per cisco release note on the upgradeDirect migration 1. Install LMS 4.2.4 2. Install LMS 4.2.5The backup data is a...
I am having issues recently after I configured port channel on my cisco 6509E switch running IOS Version 12.2(18)SXF4 using 2 different line card,Pair one: is using the WS-SUP720-3B uplink (Bus Mode) while other side is WS-X6724-SFP (Crossbar Mode) ...
Hi, We are currently migrating from 6509-e switches to the new nexus 7009. I have f2e card module and I want to connect via dark fiber one of my SPF (SPF-10G-SR) in one of my existing 6509-e but currently we only have 1G interface and we might upgrad...
We will go and use 10G SFP, one in each FI. FI (A) will be connecting to N7K1 while FI (B) will be connecting to N7K2 as a trunk port. I assume to achieve vPC from UCS FI to N7K's require 2 10G SPF's in each FI, I'm afraid we do not have in stock as ...
Hi,I checked this scenario but each of the FI are having 2 uplinks within the 2 N7K's thus, it is understandable. What is on my mind is only 1 uplink in each FI, for example 6100 A uplink is connected to N7K1 while 6100 B uplink is connected to N7K2,...
Hi rrowlandkumc,I don't have 10G Fex on our N2K, we only have 1G as of now, If I will use my 2 N7K's and provide 10G SFP in both N7K's down link to my UCS with 2 FI, can i configure vPC knowing that the fibers are connected with the two FI? On the UC...
Hi Walter,I don't need native FC as of this moment as we do have our own SAN infrastructure, can you tell me the issues that I may face if I use my 2K? Regards,
