All,I have a weird DHCP issue. I have a DHCP scope on my switch for wireless. Most of my wireless devices can get an IP address without issue. New clients (coming to the network for the first time or new machines can't get an IP address. When thi...
Hello, I'm installing a new 9800 LC wireless controller. I have it configured but some of my clients are not getting an IP address from the Cisco switch. It appears that the mobile devices are working fine and get an IP from the pool on the switc...
Hello, I'm trying to configure a Cisco 3850 with Fios. I'm able ping across platforms and can ping all vlans. I can't connect to the internet when I connects clients to any of the vlans. Here's what I have on the switch: (192.168.1.1 is the Fios ...
I'm trying to connect a 2960-CX layer 2 switch to an ISP dedicated IP connection. I'm missing something. I want the switch to hand out private addresses and connect to the internet ISP on port 10. How do you NAT on layer 2? Here's a snapshot of ...
I have a question on how to add a switch to my network. I currently have a layer 3 switch as my core with 10 vlans running EIGRP. I want to add a 2960 CX closet switch in one area of the office. The 2960 is running ip base. Here are my questions:...
Thanks for replying. The apple mobile devices and windows client are using the same SSID. I've put below the configs. The original post didn't paste correctly.WLCinterface TwoGigabitEthernet0/0/0switchport trunk native vlan 30switchport trunk al...
Thanks for the reply. I took out the stcapp feature access-code. Ran the debug on the VG202. Didn't see any output of the debug on the VG202 for an incoming call so I figured it wasn't reaching. So I ran the debug on the gateway and here's the ou...