12-27-2019 01:50 PM
Hello,
I'm trying to configure a Cisco 3850 with Fios. I'm able ping across platforms and can ping all vlans. I can't connect to the internet when I connects clients to any of the vlans. Here's what I have on the switch: (192.168.1.1 is the Fios Router)
ip routing
!
ip dhcp excluded-address 192.168.20.1 192.168.20.9
ip dhcp excluded-address 192.168.30.1 192.168.30.9
ip dhcp excluded-address 192.168.99.1 192.168.99.10
interface GigabitEthernet1/1/1
description Connection to FIOS Router
no switchport
ip address 192.168.1.2 255.255.255.0
ip nat outside
router eigrp 10
default-metric 10000 1 255 1 1500
network 192.168.1.0
network 192.168.20.0 0.0.0.63
network 192.168.30.0 0.0.0.63
network 192.168.40.0 0.0.0.63
network 192.168.50.0 0.0.0.63
network 192.168.99.0 0.0.0.63
network 192.168.200.0 0.0.0.63
eigrp stub connected
ip route 0.0.0.0 0.0.0.0 192.168.1.1
Solved! Go to Solution.
12-27-2019 02:04 PM
Hi,
Is that a 3850 switch? If yes, this switch does not support NAT. You need a router to do the NAT for you. Have a look at this post:
https://learningnetwork.cisco.com/thread/98132
HTH
12-27-2019 02:04 PM
Hi,
Is that a 3850 switch? If yes, this switch does not support NAT. You need a router to do the NAT for you. Have a look at this post:
https://learningnetwork.cisco.com/thread/98132
HTH
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide