Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
May i know if Spark Board 55 and 70 support H.323 and IP based calling method?
If the spark board is only going to be used for internal call within the organisation.
How can this be setup and can anyone provide the guide?
Thanks.
jimmy
HI,
I am looking for an autonomous Cisco AP.
and found this link http://www.cisco.com/c/en/us/products/wireless/buyers-guide.html#~indoorac-wave1.
from here i can see 3700 and 2700 support autonomous mode.
however in Cisco support forum, some are di...
Hi all,
We want to understand how much WAAS can optimize FTP traffic, we are having server to server FTP traffic running every day, would like to understand if we can design WAN without WAAS.
Since using WAAS on only one server on spoke site is not a...
Hi guys,
Can someone help to advise us asap on how the based-license endpoint quantity are estimated?
We are confused the following FAQ in the pdf file below.
What license SKUs should I order if the endpoint deployment count falls between differe...
hi guys,
i am planning to get a new SNS 3495 hardware with ACS software and based license,
CSACS-3495-UP-K9 Upgrade to Cisco Secure ACS application software on the Cisco SNS 3495 appliance with Base license from previous versions
CSACS-3495-K9 ...
hi Rashika and Ric,
What part number of the AP should i look for?
in CCW tool, i only found AIR-AP3702I-UXK9 and AIR-CAP3702I-S-K9.
is the AIR-AP3702I-UXK9, an autonomous AP or controller-based AP?
Thanks.
jimmy
hi Ric,
i saw from the release note below that 3700 and 2700 are started to be supported in Autonomous mode in 15.3(3)JAB.
http://www.cisco.com/c/en/us/td/docs/wireless/access_point/15-3-3/configuration/guide/cg15-3-3/cg15-3-3-chap1-overview.html
bef...
hi Reza,Unfortunately, we have only dynamic leased public address for the 2nd uplink as per package subscribed. Is it possible to implement the feature if the ISP can fix the IP?
hi Reza,Thanks for the advise.i have only 1 firewall with 2 router for two uplinks connected to 2 ports on the ASA. Do you have any idea on how to configure that....And the second uplink have dynamic public ip.
Hi Reza, Thanks for your feedback.In the case if both uplinks are coming from the same ISP, can we use1.dual internet links NATing with PBR and IP SLA https://supportforums.cisco.com/document/32186/dual-internet-links-nating-pbr-and-ip-sla2.Load ba...
