Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,I have some MPLS VPN PE routers. I enabled marking on the LAN ingress interface and shaping on the WAN egress interface that is MPLS enabled.But marked ingress packets do not match on egress MPLS interface.What should I do?
Hi,I had CUCM 11.5 and upgraded it to version 15 SU3a with data export method and changed publisher hostname during that.After that all phones which are 79xx get host not found in corporate directory.The phone URL parameters and secure phone URL para...
Hi,I have a working vWLC with 5 APs and all of them are in one VLAN and SSID.Now I want to add another SSID and VLAN. I changed the switch ports that connect to APs from access to trunk with native VLAN that is previous access VLAN. I created another...
Hi,I have configured MPLS EVPN and control plane seems to work but cannot ping from one BD-VIF to another BD-VIF. MPLS VPN over DMVPN works already and I added EVPN to it.I used this link for configuration:https://www.cisco.com/c/en/us/td/docs/router...
I have 5 routers that have been configured for MPLS VPN without LDP.R1, R2, and R3 are connected to R4 and R33 is connected to R3.Both overlay and underlay are in BGP (VPNV4 and IPV4) but I want to separate them and not use BGP for underlay.In R33 wh...
Hello M02@rt37I think this is not expected behavior.Often some traffic is not matched with any class and hence I see class default has matched traffic.Furthermore this router is one of my branch routers and how is it possible to they send only voice ...
