Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi everyone,I’m running Cisco Meeting Server 3.10.1 with Expressway-C/E X14.0.11.On my CMS, I’ve configured meetingapps on port 447 for survey and file transfer, and everything works fine when users connect on the local network.Recently, I configured...
On Cisco Meeting Server 3.10, when I add a participant with a mobile number to a scheduled meeting from the Web App, the calling number (ANI) is shown as: spacename.space@CUCM_IP_AddressInstead, I want it to display a specific number.Does anyone know...
Hi Dear friends,I have Cisco Meeting Server (CMS) 3.9 and Cisco Meeting Management (CMM) 3.9. When I create an ad-hoc conference from an IP phone, the calling number is correctly displayed as the Directory Number (DN), and everything works fine.Howev...
Hi everyone,I’m running Cisco ISE version 3.1.0.518. About 30 days ago, I changed the Root CA and all PSN certificates, and everything worked fine.Two weeks ago, I upgraded to Patch 10, and the system continued to function normally. However, five day...
I encountered an issue where my ISE servers in Administration > Servers > ISE Servers within Cisco Prime Infrastructure were marked as Unreachable. I deleted them and attempted to re-add them, but I ran into connectivity issues and user account stat...
After a lot of analysis, I found the root cause of my issue.The problem was that the calling number (spacename.space@CUCM_IP_Address) coming from CMS to CUCM couldn’t be translated into digits using a Calling Party Transform Mask in the Route Pattern...
I regenerated the ISE messaging service certificate for both the primary and secondary nodes, as well as all PSNs. The issue was resolved for 2 to 3 days, but then it reoccurred. Has anyone encountered this before or found a permanent solution?
I configured a new Calling Search Space (CSS) for the trunk between Cisco Meeting Server (CMS) and Cisco Call Manager (CUCM) and applied it to inbound calls.To ensure a specific Calling Party number for outbound calls, I set the Calling Party Transfo...
I discovered that when I assign roles to participants in a scheduled meeting, the roles are not applied. However, when I assign roles in the space settings, they are applied correctly.
