Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello,
I am moving a Prime server from one DC to another. I want to use the same IP and I need a small outage time. How can I achieve this?
Thanks,
Akshay
Hello guys,
I need to migrate an ISE 1.2 server and Prime server from a company we have acquired to our DC. We intend to use the same IP Addressing scheme. Can you please let me know the best way to do it, without causing too much of an outage?
Than...
Hello everyone,
My client had a physical 5500 WLC and is moving to a vWLC. The code running on the physical was 7.x. I took a backup config of the physical WLC and built my vWLC with IOS 8.0. When I try uploading the config via TFTP, the upload is su...
Hello,I have cisco unity connection 10.5 installed and integrated to CUCM with SIP. The integration is good and I can see the ports being used in RTMT. The problem i'm facing is when I call a person who's phone is not registered and the call forward ...
Hello,I have my Video endpoints registered to the CUCM and when I get an inbound call to my video endpoints from the external network via VCS-E--->VCS-C--->CUCM, I only get the display name of the external endpoint and not the SIP URI, so I cannot ca...
Hi Marcelo,I have the above configured on my SIP trunk security profile, however when I had a look at my SIP trunks to CUC, the subscriber shows full service and the publisher does not. Also the ports in the CUC are all registered to the Publisher an...
Hi Marcelo,Here is the attached port monitor from RTMT. I configured a registered user for cfwd all to his VM. The caller is Catherine and she gets the "please enter the pin followed by #" message. Thanks
