Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, my 819 4G router runs IOS c800-universalk9-mz.SPA.157-3.M2.bin, how can I config the LTE to v4 v6 dual stack? I had "cellular 0 lte profile create 1 ctnet none ipv4v6", and config like:
interface Cellular0
no ip address
encapsulation...
I have 1832i AP with a WLC 2504, if use a Macbook to test internet speed via speedtest.net, it could reach 90Mbps, but use iPhone to test, it only could do 60-65Mbps, totally have no idea why? iperf test in LAN could reach 400mbps without problem.
P...
The WLC 2504+3702i AP, which in local LAN iperf TCP test, has about 450mbps throughput, but in speedtest.net, the internet speed only 60mbps(I got 100m internet). Testing the UBNT and other AP, they both has 80+mbps, is there any one tell me why inte...
I got a flexvpn client with sVTI, but it keeps creating child sa every 60s, like below. The server is a linux box, the config works fine in IOS 15.3 but not 15.4+.
Any one to help out? Thanks.
do sh cry ike se
IPv4 Crypto IKEv2 Session
Sessi...
Hi, George. Did you test it under Macbook Broadcom wifi? I test several 3702 and 3802, all is 300-400mbps, 3802 even worse, but with 1832 and 1852, could reach 600-700mbps very easy. All the test under totally same environment. My config: https://gis...
Hello, we have some 3702, 1852, 3802 in office, WLC is 2504, we are happy with 1852, it's performance is so good, iperf could have 700+mbps, but both 3702 and 3802 only have 300-400mbps, it seems Marvell chip based AP never get well with Macbook(Broa...
