Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi, If a small buisiness only need one AP and they dosent want to buy a controler. Do I need to buy a license to convert a lightweight AP to autonomous?
Is it the same if the AP is covered by a SmartNet?
Thanks for your answer.
Have a nice day.
Hi everyoneI am about to put in production two ASA firewall in an active/standby mode to my network. I'm asking myself about the failover polltime and timeout in relation with the STP convergence time. I don't want the standby firewall to get active ...
Ive configured two dhcp pool to serve the same subnet, the first pool have static bindind and the second is dynamic. The configuration is working correctly except that I'm having delay to get answer from the router. Debug DHCP give me output about "n...
Hi everyoneI am in front of a situation that make me search for the maximum network diameter that rapid spanning tree can allow. I saw many topic talking about standard STP that allow by default a network diameter of 7 switches. Some talk about MST, ...
Hi Georg, I've already did all that. I also tried to change the server in the http url for the IP address of the server, but still stuck with the same error (205) Thanks for your answer. Have a nice day.
Hi, I would say the issue is more located at the printer. Try by updating the printer NIC driver, check the configuration of the NIC itself. It's not working with two differents switches! It's more likely to be something else than the switches (bad n...
Hi, If the port on the switch and the printer is set to auto-negotiate it's speed and duplex, look at that brown port and check how duplex have been set by the auto-negotiation. If your switch port indicate that it is working in half-duplex and that ...
