Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello!I have two numbers - 5555555 and 6666666 (over sip trunk to cisco 2811).Now I have CME on 2811 and CIPC for local phones. If need I can use UCM 8.0I need to display the called number (5555555 or 6666666) on the internal phone when receive call...
Hello!We plan to use WCCP with a Cisco ASA 5510. How can increase the CPU load of Cisco ASA 5510 with HTTP traffic about 100Mbps?Current CPU load about 30-40%.
Hello!I have ACS 4.2 and AP 1240. I`m use two SSID - guest and user. Guest ssid must use PEAP authentication, user ssid must use EAT-TLS authentication (acs user local database). All work correctly. But when i create user for EAP-TLS, i`m create with...
Hello!I`m using CME 7.0.1 and standard tcl scripts app-b-acd. When we receive incoming call, he hear welcome prompt and for a call of internal number it is necessary to type number (for example 5, and after internal number). Can CCME use DISA - incom...
Hello!I`m planing to use 2 context with PIX 515E.But confused - admin context counted with other context license? Can I create 2 context for 2 customers and also use admin context?
Thanks for your reply!Also I try to find this value in MIB navigator, MIB-files on ftp.cisco.com and etc...But can`t find value that support catos 6.4.(1-9). And when I try to snmpget for this value - but fail (unknown value).I try snmpwalk to cataly...
but if move port from one PIX to some not used VLAN - L2 counter will be incremented because all switch sends BPDU frame. It may be varios numbers of frame - but in docs says that if one packet recived - all works OK.
