About Satya Siba Sundar Mishra

Satya Siba Sundar Mishra · 05-21-2013

Hi,I am trying to troubloeshoot the the High cpu utilization of N7K. The switch is connected in a POC setup and traffic load is very less. It is running with NXOS 6.0.4. For past 1 month I have observed the CPU utilization goes upto 80% without any t...

ACS 4.2 user group mapping · 09-13-2012

Hi,We are using ACS 4.2.1.15 with patch 8 on ACS 1113 SE box.Our requirement is to assign ACS loal group to user on basis of windows Nt group. Which means I dont wants to create individual users in ACS rather when user will login, the auth request wi...

Satya Siba Sundar Mishra · 09-07-2012

I had one nortel and one cisco switch. Two diffrent links are coming from two diffrent ISP`s. I have configured etherchannel between nortel and cisco as metroethernet. I want to replace nortel with cisco. When i tried to do so, i am getting RTO betw...

Satya Siba Sundar Mishra · 08-14-2012

Hi,I have configured user level NAR in my ACS 1113 SE running with 4.2.0.124(No patch). The routers and switches which are permitted in NAR are accessble as per configuration and the devices which are not configured are not accessble. I mean to say ...

Satya Siba Sundar Mishra · 07-31-2012

Hi ,My network is currently running with SNMP v2 configured in easch devices. With snmp v2 our LMS 3.2 server is working fine. However we have planned to migrate our network to snmp v3 . I have configured my few devices for SNMP v3 and added them to ...

Satya Siba Sundar Mishra · 10-24-2013

Hi,i am also getting same errror on ciso 7609Oct 25 01:56:28.447: %MWAM-CFC1-0-CORRECTABLE_ECC_ERR: A correctable ECC error has occurred, A_BUS_L2_ERRORS: 0x0, A_BUS_MEMIO_ERRORS: 0xFF, A_SCD_BUS_ERR_STATUS: 0x80DC0700Oct 25 01:57:35.203: %MWAM-CFC1...

Satya Siba Sundar Mishra · 10-19-2012

Thanks gaganjeet.. My problem resolved with this post.

ACS 4.2 user group mapping · 09-17-2012

Dear AmJad & Tarik,Thanks for your help. When I got confirmation from Tarik it works with Tacacs I verified the RA logs throughly for each individual user authentication. Post that I found AD reply does not contain the desired group membership becau...

Satya Siba Sundar Mishra · 08-14-2012

Thanks a lot.It resolved my problem by changing the algorithm to DES.

Satya Siba Sundar Mishra · 12-22-2011

Hi,Please find the same . I have attached the ping response from both routers to both routers as well as the show interface o/p after each ping taken parallel.

Member Since	‎03-30-2008 09:06 PM
Date Last Visited	‎11-21-2019 06:34 AM
Posts	123
Total Helpful Votes Received	3

User Statistics

User Activity

Nexus 7K high CPU utilization

ACS 4.2 user group mapping

6509 etherchannel creating problem..

ACS 1113 NAR related problem.

LMS 3.2 with SNMP v3 not working

Log Message "MWAM-DFC1-0-CORRECTABLE_ECC_ERR:"

Re: LMS 3.2 and RME 4.3.1 telnet with tacacs+ fails

ACS 4.2 user group mapping

Re: LMS 3.2 with SNMP v3 not working

Re: CRC and overrun counters increasing