Hi All, Recently i bought a license for an ASA 5525 ( L-ASA5525-TAMC-1Y) I received a PAK and everything seems to be ok, but i have a question... is there a contract number to associate with it? Just in case i need to open a TAC ticket and what can expect for support? Thanks in Advance!!! ... View more

Hi All I got a problem trying to re route an incoming call There is an E1, a PBX number, let's name it 1234, all incoming calls enter to a pilot nomber 3800 (operator) recently was added a FXO line, let's name it 4567 and the calls enter to same extension, to this point everything goes fine What i want is that all calls incoming from line 4567 be forwarded to an external number, let's name it 9999 Actually i am performing a call forwarding from extension 3835 to 9999, but i can't do it when the incoming call form 4567 be forwarded to the 3835, or even better, directly to 9999 Here the actual configuration voice translation-rule 1  rule 1 /1234/ /3800/ voice translation-profile XXXXX translate called 1 voice-port 0/0/0:1 connection plar 3800 dial-peer voice 42 pots translation-profile incoming XXXX service aa1 shutdown incoming called-number . direct-inward-dial port 0/0/0:1 forward-digits all ephone-dn 8 octo-line number 3835 label Ext 3835 description YYYYY name YYYYY call-forward all 9999 corlist incoming Usuarios no huntstop Thanks a lot in Advance! Cheers! ... View more

Hola todos, tengo un problema para reenrutar una llamada entrante, el problema es este: Existe un E1, pongamosle el numero 1234, las llamadas entran al piloto 3800 (que es la operadora) recientemente se agregó una linea FXO, pongamosle 4567 y las llamadas entran a la misma extension, hasta alli todo bien. Lo que se requiere es que las llamadas que entran por la 4567 se desvíen a un numero externo, pongamosle 9999 Actualmente estoy haciendo un call forwarding para que las llamadas que entran a la extension 3835 se desvíen a la 9999, pero no he podido hacer que la llamada entrante del 4567 se desvíen a la 3835 o aún mejor, directamente a la 9999 Aqui la configuración actual voice translation-rule 1  rule 1 /1234/ /3800/ voice translation-profile XXXXX translate called 1 voice-port 0/0/0:1 connection plar 3800 dial-peer voice 42 pots translation-profile incoming XXXX service aa1 shutdown incoming called-number . direct-inward-dial port 0/0/0:1 forward-digits all ephone-dn 8 octo-line number 3835 label Ext 3835 description YYYYY name YYYYY call-forward all 9999 corlist incoming Usuarios no huntstop De antemano les agradezco su ayuda! Saludos! ... View more

Hola todos, tengo un problema para reenrutar una llamada entrante, el problema es este: Existe un E1, pongamosle el numero 1234, las llamadas entran al piloto 3800 (que es la operadora) recientemente se agregó una linea FXO, pongamosle 4567 y las llamadas entran a la misma extension, hasta alli todo bien. Lo que se requiere es que las llamadas que entran por la 4567 se desvíen a un numero externo, pongamosle 9999 Actualmente estoy haciendo un call forwarding para que las llamadas que entran a la extension 3835 se desvíen a la 9999, pero no he podido hacer que la llamada entrante del 4567 se desvíen a la 3835 o aún mejor, directamente a la 9999 Aqui la configuración actual voice translation-rule 1  rule 1 /1234/ /3800/ voice translation-profile XXXXX translate called 1 voice-port 0/0/0:1 connection plar 3800 dial-peer voice 42 pots translation-profile incoming XXXX service aa1 shutdown incoming called-number . direct-inward-dial port 0/0/0:1 forward-digits all ephone-dn 8 octo-line number 3835 label Ext 3835 description YYYYY name YYYYY call-forward all 9999 corlist incoming Usuarios no huntstop De antemano les agradezco su ayuda! Saludos! ... View more

Hola, estoy trabajando en un modulo de Ap dentro de un Router Series 891 y estoy tratando de forzarlo a que trabaje solamente en 802.11n pero no lo he conseguido La configuración que estoy tratando de aplicar, y que de hecho me deja pero no veo ningun cambio es: interface dot11Radio0 speed basic-54-0 m7. m8.- m15. interface dot11Radio0 speed basic-54-0  m15. interface dot11Radio0 speed basic-54-0 m0. m1. m2. m3. m4. m5. m6. m7. m8. m9. m10. m11. m12. m13. m14. m15. Esto debido a que mínimo debo agregar una velocidad basic-x y la mas alta es la 54 (802.11g)  La idea es que solamente funcione con 802.11n Cualquier ayuda es bien recibida Saludos ... View more

Hello Everyone, i am getting this informational messages in a C867VAE-W-A-K9 (at the Access Point Module), seems like statistics from DSL conection: Cur_Linestate = 0xd VDSL_DSL_CMD_LINE_STATE_GET success US: attndr 2645, actps 0, actatp 130, curLatn 62, curSatn 63, curSnrMgn 249 DS: attndr 25168, actps 0, actatp 151, curLatn 20, curSatn 0, curSnrMgn 421 ****VDSL_DSL_CMD_LINE_ST_GET success I've been trying to get some info about this issue but i found nothing... The strange thing is that is inside a Access Point Module, why it shows DSL warings or statistics inside? i think has no relation, maybe i am wrong Anybody has seen this behavior? how can i fix it? Thanks in Advance ... View more

Hello everybody, i am getting this debug messages at the Wireless Access Point module in a Router C867VAE-W-A-K9 ap#Cur_Linestate = 0xd VDSL_DSL_CMD_LINE_STATE_GET success US: attndr 1389, actps 0, actatp 124, curLatn 0, curSatn 0, curSnrMgn 63 DS: attndr 30964, actps 0, actatp 47, curLatn 15, curSatn 12, curSnrMgn 366 ****VDSL_DSL_CMD_LINE_ST_GET success The issue is that i Can´t work with this debug logs at screen i tried this commands: no terminal monitor undebug all no debug all, etc but says: This command is not activated and only allowed for Cisco TAC to use I need to stop them, somebody can help me? Thanks in Advance! ... View more

Hi Everyone,   I need to download the new version of Packet Tracer, but i forgot my username/password. Is there a way to link my CCO  with the Netacad?   Thanks in Advance ... View more

Hello Everybody! I got an issue with a Nexus 7009 when i try to get info about traffic on all the intefaces vlan. I got an Nexus 7010 and everything is ok on the 7010 the NX-OS is  n7000-s1-dk9.5.2.5.bin (cisco Nexus7000 C7010 (10 Slot) Chassis ("Supervisor module-1X")) on the 7009 the NX-OS is n7000-s2-dk9.6.1.2.bin (cisco Nexus7000 C7009 (9 Slot) Chassis ("Supervisor module-2")) There are the output of every one: 7010 sh interface vlan 100 Vlan100 is up, line protocol is up Hardware is EtherSVI, address is  64a0.e73e.4a43 MTU 9216 bytes, BW 1000000 Kbit, DLY 10 usec,   reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive not supported ARP type: ARPA Last clearing of "show interface" counters 18:50:11 60 seconds input rate 278 bits/sec, 0 packets/sec 60 seconds output rate 6890624 bits/sec, 581 packets/sec Load-Interval #2: 5 minute (300 seconds)    input rate 310 bps, 0 pps; output rate 5.51 Mbps, 512 pps L3 Switched:    input: 6377335 pkts, 629779216 bytes - output: 2324464692 pkts, 194832837128 3 bytes L3 in Switched:    ucast: 858960 pkts, 88978466 bytes - mcast: 5518375 pkts, 540800750 bytes L3 out Switched:    ucast: 2324464692 pkts, 1948328371283 bytes - mcast: 0 pkts, 0 byte show inter vlan 100 counter -------------------------------------------------------------------------------- Port                                 InOctets                      InUcastPkts -------------------------------------------------------------------------------- Vlan100                            629456345                            858512 -------------------------------------------------------------------------------- Port                              InMcastPkts                      InBcastPkts -------------------------------------------------------------------------------- Vlan100                              5515532                                -- -------------------------------------------------------------------------------- Port                                OutOctets                     OutUcastPkts -------------------------------------------------------------------------------- Vlan100                        1947750766181                        2322427231 -------------------------------------------------------------------------------- Port                             OutMcastPkts                     OutBcastPkts -------------------------------------------------------------------------------- Vlan100                                    0                                -- 7009 sh interface vlan 100 Vlan100 is up, line protocol is up Hardware is EtherSVI, address is  8478.ac58.dec3 Description: MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,   reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive not supported ARP type: ARPA Last clearing of "show interface" counters never show inter vlan 100 counter -------------------------------------------------------------------------------- Port                                 InOctets                      InUcastPkts -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Port                              InMcastPkts                      InBcastPkts -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Port                                OutOctets                     OutUcastPkts -------------------------------------------------------------------------------- -------------------------------------------------------------------------------- Port                             OutMcastPkts                     OutBcastPkts -------------------------------------------------------------------------------- I´ve tried to clear counter on all interfaces and says that counters have never been cleared Do any know something about the issue? I mean, bug or something? I need that info because on my monitor tool i can't see any traffic... Thanks in Advance! ... View more