Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hi,
I am trying to establish IPSec tunnel between HO and multiple remote sites. I have configured Static tunnel on remote branches and dynamic tunnel on Head Office. The problem is IPSec tunnel is not comming up when I am using BGP as a routing proto...
Hi everyone,
I have a router ISR 4331 on which I have created a tunnel interface and loopback interface as a source interface of tunnel connected with my remote site. Recently I have started seeing packet discards on my tunnel interface. My MPLS pr...
Hi,
I have my client who have a firewall 5520 connecting with its OUTSIDE interface with router's inside interface. All ISP links are terminating on router's sub-interface. The customer is using IP SLA Tracking.
Router is configured with policy based...
Hi,
I have my client who has Huawei GH8040h router connecting with its LAN port with Cisco 3750 switch. On Cisco switch when I configure a port connecting with Huawei's LAN port the link is getting UP and running fine. However when I put that port in...
Hi, we are connecting Nexus 5548UP with Dell Storage over fibre channel ports, the port status is showing "link not failed or Not connected" when I put the speed 8Gb, but when the speed mode is auto it sets the speed to 4gb and the ;ink status is com...
@MrPeter Thankyou very much for your reply, I continued to solve this issue by myself and I successully did it, I configured the frame relay interface as ospf broadcast network and created the frame relay mapping between all spokes (mutually) through...
