Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We have a S2S VPN to Azure using our FTD. From time to time the traffic will drop to “a one way street”. Basically we can connect to severs in Azure but data to severs on site cannot be accessed. Example. I can log into Azure server A and can ping Ca...
I am having an issue migrating the following commands from a 2900 to an ISR4351. I'm not that familiar with the clocking commands. Can someone provide an example of what I need to use on the ISR?Routing, ISR 4000 Seriesnetwork-clock-participate wic 1...
I need to apply QOS to my routers for ZOOM. I noticed on the ZOOM controller the DSCP ports are different. The default Zoom DSCP marking values are 56 for audio, 40 for video, and 40 for signaling. Would changing the following work? From this....cla...
I am in the process of migrating from ACS 3.3 for Windows to ACS 5.0. Does the ACS 5.0 support IP pols on the box itself? I can't seem to find the option on the box.
I have ZVRS Z-340 I am trying to connect to an outside server. I have the policy outbound for the ports the phone needs. If SIP is inspected on the ASA is their anything else I need to enable for STUN?Below are the ports the Vid phone requires outbou...
The traffic is internal private addressing from one vlan to another. Basically they are wanting to route all traffic sent to a server to another server on another Vlan.Ex.Traffic sent to 10.1.1.2 on vlan1 needs to be redirected to 10.1.2.2 vlan2.
Here's the latest config... I can connect, get an IP but still cannot access the local host or the firewall. The firewall show that I have a tunnel but I still can't access anything.
I get the banner and IP adress info...This is what the client log provides...1 13:45:32.942 05/30/08 Sev=Warning/2 CVPND/0xE3400013AddRoute failed to add a route: code 87 Destination 172.20.255.255 Netmask 255.255.255.255 Gateway 10.1.2.1 Inte...
