Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
Hello, My customer wants to every time that the user re-connects to the network it receives a webpage with message : "Welcome back Guest" but before that the user needs to self-register and receive a SMS with his credentials. I said to him that Cisco...
Hello,Recently i implanted the AP SSO in WiSM2 and it is working fine in my client and the modules are in the 6500 in VSS configuration.I have another environment with 7500 where the client have two 7500 very distant one from another.In this situatio...
Hi,I have one question about AnyConnect using Wireless networks.Will i need some license to manage my wireless adapters using Cisco AnyConnect to connect to my wireless networks ?Thank you.
Hello,In my environment i have this topology :WLC ~~~~~~|Another Vendor Client Radio doing Bridge|----Camera | |----RAP-1552E~~~~~~~MAP-1552E~~~~~|Another Vendo...
Hello,I'm using the 2106 in one environment with ROOT AP and MESH AP and when i put these in the Bridge mode, when one client connects to them it isn't working well, sometimes i can reach the client and sometimes not.I tried it with an Access Point ...
Vijay, Do the controller configuration in both WLCs are equals about parameters like WLAN id, ap groups and etc? Because if the WLAN id are different you can lose the VLAN mapping when the AP migrate from one WLC to another. About FlexConnect Group, ...
Sorry Su, I think i didn't pay attemption in the WLC speficication. It is really not supported in the 2500 controller and you don't have any option to enable this feature in the SSID or in the Global QoS.
Hello suk,You can follow the guide below :http://www.cisco.com/c/en/us/support/docs/wireless/5500-series-wireless-controllers/113682-bdr-limit-guide-00.htmlYou can apply this feature inside the SSID in the QoS tab specifying the rate limiting to that...
Rosa,The DHCP proxy is enabled in the dynamic interfaces with the DHCP Server IP address configured?These dynamic interfaces can reach the DHCP server ? Have some ACL that impossibilite to the dynamic interfaces to reach the DHCP Server ?The DHCP ser...
