Heads Up :
The post you are writing will appear in a public forum. Please ensure all content is appropriate for public consumption. Review the employee guidelines for the community here.
We are trying to integrate JabberGuestSDK-iOS-11.0.2.169 to our project. We are using swift3.2 with latest Xcode 9. We followed the instruction mentioned in installation docs, but we ran into few issues.As per the installation instruction there are t...
Hi Guys,Seems like the new Part #AIR-CT2504-HA-K9 needs some kinda licensing...to work... otherwise the redundancy is same as it was ealier with mobility groups.The documentation seems to be wrong in the case of 2504, i cannot find the redundancy but...
Hi,I have setup a vWLC on ESXi server and dedicated a trunk port on EsXi for the Second Network card of vWLC for Management and all traffic.I created Three Ineterfaces on the same and enables DHCP on my Windows DHCP server.The Problem i am facing is ...
This is a complicated scenario...We have a Large cargo handling system, which have with so many floors and 25+ cranes... the PLC's+IP Cameras of all these stacker cranes are connected to a wireless Bridge with communicates with Access-points. the who...
The Situation is i have done Wireless bridging to provide Internet access to users in first floor. so the wireless bridge is a Cisco 1231 configured as a bridge, and in first floor is a same model 1231 acting as an AP.. the problem in with PC's conne...
Hi Bilal, Have you enabled "config network web-auth captive-bypass enable" on the WLC ?Try disabling the same then the browser should auto launch - VinuWhen 'enabled' you have to manually open a webpage to get the screen. When 'disabled' it will auto...
Hi Rik,the Below are the certificate detailsISE Certificate Signed by XX-CA-PROC-06User PKI Signed by XX-CA-OTHER-08In ISE certificate Store i have the below certificatesXX-CA-OTHER-08 signed by XX-CA-ROOT-04XX-CA-PROC-06 signed by XX-CA-ROOT-04XX-CA...
Hi Vineet,I was facing similar issue, I was installing the same on VM... This is what i did to resolve the sameI re-installed the LM4.2 this time i did not change the default sysadmin name gave a password then gave a different password for GUI admin ...
